Product Code: SB300TE

About the Product

This Siltblok silt separator, Model SB300TE, has a Ø 300mm rotational moulded chamber base with 110mm EN 1401 main channel socket connections. Moreover, it includes two further 110mm side inlets at 90° and 270° from the outlet at 0°, which are provided as blanked ends for use as required.

Additionally, this top-entry model provides extra protection to the watercourse by forcing all water to go through the Blok filter before continuing through the system. This is achieved by the bucket blocking the outlet from above, and it can only be accessed from below the filter.

Furthermore, the basket has a total capacity of 7.5kg and is designed to cope with flow rates of up to 6 litres per second. We also provide a recommended inspection, emptying, and cleaning schedule depending on usage.

This silt separator is available in four different models: as the base alone, or with three standard shaft depths.

In addition, we offer an alternative product a standard entry, which you can see here.

Finally, the SB300TE is built to the following standards and regulations | Design & Construction Guidance (Type D & E Chambers)Building Regulations part H | BS EN13598-1&2 | BS EN 681-1.

About Siltblok

The Siltblok range offers a series of silt traps and separators, featuring a 100% recycled thermoplastic block (Blok). This Blok is installed into our rotational moulded chambers, forcing all flow through the Blok before reaching the outlet, thereby filtering out Total Suspended Solids including silt up to 30μm (0.03mm).

Before leaving our factory, all chambers are tested per the required standards.