About the Product
This Siltblok silt trap, Model SB600, has a Ø 600mm rotational moulded chamber base, following with 150mm or 225mm twinwall main channel socket connections. Moreover, it includes two further 110mm side inlets at 90° and 270° from the outlet at 0°, which are provided as blanked ends for use as required.
Additionally, the catchpit base has a 515mm sump depth allowing for substantial storage of silt and debris.
This silt trap is available in five different models: as the base alone, or with four standard shaft depths.
In addition, we offer an alternative product with a Ø 1050mm chamber which you can see here.
Finally, the SB600 is built to the following standards and regulations | Design & Construction Guidance (Type D & E Chambers) | Building Regulations part H | BS EN13598-1&2 | BS EN 681-1.
About Siltblok
The Siltblok range offers a series of silt traps and separators, featuring a 100% recycled thermoplastic block (Blok). This Blok is installed into our rotational moulded chambers, forcing all flow through the Blok before reaching the outlet, thereby filtering out Total Suspended Solids including silt up to 30μm (0.03mm).
Before leaving our factory, all chambers are tested per the required standards.
